Multi-Analyte Chromatography & Labeled Mass-Ratio Reference
Multi-Peptide Blend COA Verification & Labeled Mass-Ratio Guide: Auditing GLOW 70mg, KLOW 80mg, Wolverine 20mg (10/10) & CJC-1295 / Ipamorelin 10mg (5/5)
Direct Summary: In a co-lyophilized multi-peptide blend vial (such as GLOW 70 mg, KLOW 80 mg, Wolverine 20 mg [10 mg + 10 mg], or CJC-1295 without DAC + Ipamorelin 10 mg [5 mg + 5 mg]), the constituent mass ratio printed on the label is supplier-declared unless a quantitative multi-analyte assay establishes the actual mass (mg/vial) of each individual component. Under ICH Q2(R2) analytical principles, raw RP-HPLC relative peak-area percentages (% area at 214/220 nm) do not equal gravimetric mass fractions because structurally distinct peptides exhibit different UV molar absorptivities (detector response factors) and require individual reference-standard calibration curves.
1. Multi-Analyte RP-HPLC Calibration
Why RP-HPLC Peak-Area Percentages Alone Do Not Establish Constituent Mass Ratios
When a single-analyte peptide is chromatographed at 214 nm, all peptide-related impurity peaks share a roughly similar amide-backbone chromophore. In a multi-peptide blend, however, the co-formulated analytes differ substantially in chain length, aromatic side-chain content (Trp, Tyr, Phe, His), and copper-chelation complexes:
- Differing Detector Response Factors (
RF): A 1:1 gravimetric mixture (5.0 mgPeptide A +5.0 mgPeptide B) rarely produces a 50.0% : 50.0% UV peak-area ratio at 214 nm or 220 nm. Converting peak area (mAU·s) into actual milligrams per vial requires calibrating each resolved peak against an authenticated reference standard of that specific constituent (ICH Q2(R2) §3.1.2.2 & §4.2). - Single Combined Purity Figures Are Insufficient: A certificate that prints a single combined “Purity: 99.4%” number for a 2-, 3-, or 4-peptide blend without reporting the individual constituent masses (
mg/vial) cannot verify whether a nominally labeled 10 mg + 10 mg blend actually contains a 10:10 ratio or a skewed 14:6 ratio. - Wolverine Blend SKU Nomenclature Note (20 mg Total vs. Legacy 10 mg URL Slug): Both Simms Research and True Peptides stock their documented Wolverine blend as a 20 mg total vial (
10 mg BPC-157 + 10 mg TB-500). While PepLab retains the legacy route slug/compounds/wolverine-stack-10mgfor URL continuity, all documented supplier pricing and COA comparisons below reflect the actual 20 mg (10 mg + 10 mg) catalog SKU.
2. Chemical Identity & Molecular Species Verification
Distinguishing Full-Length Thymosin Beta-4 from Synthetic TB-500 Fragments
Three of the four documented blends below (GLOW 70 mg, KLOW 80 mg, and Wolverine 20 mg) list “TB-500 (Thymosin Beta-4)” as a constituent. In commercial research-reagent catalogs, the label “TB-500” is used across two chemically distinct molecular species that must not be treated as interchangeable:
- Full-Length Thymosin Beta-4 (43 Amino Acids, CAS
77591-33-4): The complete N-acetylated 43-residue polypeptide (Ac-SDKPDMAEIEKFDKSKLKKTETQEKNPLPSKETIEQEKQAGES) with a free-base average molecular weight of~4963.5 Da (g/mol). - Synthetic TB-500 Actin-Binding Fragment (e.g.,
Ac-LKKTETQ, 7 Amino Acids): A truncated N-acetylated heptapeptide fragment corresponding to residues 17–23 of Thymosin Beta-4, with an average molecular weight of~889.0 Da (g/mol)(or related short synthetic fragments such asAc-SDKP). - What to Check on the Blend LC-MS Certificate: Because molar concentration (
mol/L) for a 10 mg mass differs by a factor of ~5.6x between a4963.5 Da43-mer and an889.0 Da7-mer fragment, inspect the LC-MS mass spectrum on the batch COA to verify which exact molecular weight species was identified.
3. Supplier-Published Blend COA & Catalog Audit (Reviewed 2026-11-04)
Current Document State Across Four Multi-Peptide Research Blends
The table below reports the exact supplier-declared composition, listed catalog price, and current COA document state in our verified catalog snapshot. Where a supplier product page had no public batch COA PDF linked during our 2026-11-04 review—or where a linked PDF reports only a single purity percentage without constituent mass assays—that limitation is stated explicitly:
| Blend & Supplier-Declared Labeled Ratio | Simms Research — Documented SKU & COA Status | True Peptides — Documented SKU & COA Status |
|---|---|---|
|
GLOW 70mg Blend (50mg GHK-Cu + 10mg BPC-157 + 10mg TB-500)
Declared Ratio (70 mg total): 50 mg GHK-Cu (Copper Tripeptide-1) + 10 mg BPC-157 (Pentadecapeptide) + 10 mg TB-500 (Thymosin Beta-4)
Identifiers: 49557-75-7 / 137525-51-0 / 77591-33-4
|
Documented SKU: 70 mg total (1 vial (70mg lyophilized powder)) · Stock: Unknown / Verify availability
COA Audit Status: No public batch COA PDF linked on supplier product page during 2026-11-04 review.
Listed Price: $96.00 USD ($1.37/labeled total mg) · 1st order w/
PEPLAB10: $86.40 USD ($1.23/labeled total mg)
Paid link: PepLab may earn a commission if you purchase through this link.
|
Not documented in our 2026-11-04 supplier catalog snapshot. |
|
KLOW 80mg Blend (50mg GHK-Cu + 10mg BPC-157 + 10mg TB-500 + 10mg KPV)
Declared Ratio (80 mg total): 50 mg GHK-Cu (Copper Tripeptide-1) + 10 mg BPC-157 (Pentadecapeptide) + 10 mg TB-500 (Thymosin Beta-4) + 10 mg KPV (Alpha-MSH Tripeptide 11-13)
Identifiers: 49557-75-7 / 137525-51-0 / 77591-33-4 / 67727-97-3
|
Documented SKU: 80 mg total (1 vial (80mg lyophilized powder)) · Stock: Unknown / Verify availability
COA Audit Status: Supplier PDF Linked (Lot #2026-KW189, Lab, tested 2026-07-17): multi-component assay metrics not yet extracted into summary table — open linked PDF to inspect constituent peaks.
Listed Price: $122.00 USD ($1.52/labeled total mg) · 1st order w/
PEPLAB10: $109.80 USD ($1.37/labeled total mg)
Paid link: PepLab may earn a commission if you purchase through this link.
|
Documented SKU: 80 mg total (1 vial (80mg lyophilized powder)) · Stock: Unknown / Verify availability
COA Audit Status: Supplier PDF Linked (Lot #260902, Lab, tested 2026-09-22): multi-component assay metrics not yet extracted into summary table — open linked PDF to inspect constituent peaks.
Listed Price: $124.00 USD ($1.55/labeled total mg)
Paid link: PepLab may earn a commission if you purchase through this link.
|
|
Wolverine Stack 20mg Blend (10mg BPC-157 + 10mg TB-500)
Declared Ratio (20 mg total): 10 mg BPC-157 (Pentadecapeptide) + 10 mg TB-500 (Thymosin Beta-4)
Identifiers: 137525-51-0 / 885340-08-9 (or 77591-33-4)
|
Documented SKU: 20 mg total (1 vial (20mg total lyophilized blend: 10mg BPC-157 + 10mg TB-500 active fragment Ac-LKKTETQ-OH)) · Stock: In Stock
COA Audit Status: No public batch COA PDF linked on supplier product page during 2026-11-04 review.
Listed Price: $79.00 USD ($3.95/labeled total mg) · 1st order w/
PEPLAB10: $71.10 USD ($3.56/labeled total mg)
Paid link: PepLab may earn a commission if you purchase through this link.
|
Documented SKU: 20 mg total (1 vial (20mg total lyophilized blend: 10mg BPC-157 + 10mg TB-500, SKU TP-BT20)) · Stock: In Stock
COA Audit Status: Purity-Only PDF Linked (Lot #260903, Optiq Health Labs, LLC, tested 2026-09-22): reports 99.4% RP-HPLC purity; quantitative mg/vial mass of individual constituents not reported on certificate.
Listed Price: $110.00 USD ($5.50/labeled total mg)
Paid link: PepLab may earn a commission if you purchase through this link.
|
|
CJC-1295 No DAC (Mod GRF 1-29) + Ipamorelin 10mg Blend
Declared Ratio (10 mg total): 5 mg CJC-1295 No DAC (Mod GRF 1-29) + 5 mg Ipamorelin (Selective GHRP)
Identifiers: 863288-34-0 / 170851-70-4
|
Documented SKU: 10 mg total (1 vial (10mg total lyophilized blend: 5mg CJC-1295 No DAC + 5mg Ipamorelin)) · Stock: In Stock
COA Audit Status: No public batch COA PDF linked on supplier product page during 2026-11-04 review.
Listed Price: $78.00 USD ($7.80/labeled total mg) · 1st order w/
PEPLAB10: $70.20 USD ($7.02/labeled total mg)
Paid link: PepLab may earn a commission if you purchase through this link.
|
Documented SKU: 10 mg total (1 vial (10mg total lyophilized blend: 5mg CJC-1295 No DAC + 5mg Ipamorelin, SKU TP-CI10)) · Stock: In Stock
COA Audit Status: Purity-Only PDF Linked (Lot #260905, Optiq Health Labs, LLC, tested 2026-09-22): reports 99.6% RP-HPLC purity; quantitative mg/vial mass of individual constituents not reported on certificate.
Listed Price: $89.00 USD ($8.90/labeled total mg)
Paid link: PepLab may earn a commission if you purchase through this link.
|
Analytical & Procurement Reference Series